Abstract

This work details a methodology to characterize the performance of solar thermal and photovoltaic thermal (PVT) collectors using an indoor solar simulator. In this study, several cases have been compared to show that the methodology can be used to extract fundamental performance characteristics from a solar collector. In the first case, a serpentine collector was compared against a header riser collector using the same mass flow rate. It was found that the header riser was less efficient, with a 34% increase in the overall loss coefficient. The experimental results were compared with commonly used empirical models and showed a close agreement. In the second case, the impact on performance of using a polycarbonate cover is presented. The results show that the optical efficiency of the collector is reduced by 12% when using a cover, however, because the loss coefficient is reduced by 53%, the covered collector performs better when there is a large temperature difference between the absorber and the ambient. The third case investigates the combined performance of a PVT collector, that produces both heat and electricity from a single device. By placing photovoltaic (PV) laminates on top of the serpentine absorber, the thermal efficiency is reduced by 15%. When electricity is generated by laminates, the thermal efficiency is reduced by a further 3.5%, this drop in thermal efficiency is a result of the incident radiation producing electricity before reaching the thermal absorber. The combined efficiency of the PVT collectors was compared at controlled inlet temperatures. The serpentine design had the highest combined efficiency of 61% with 8% electricity at the lowest inlet temperature (21°C). The dominant form of loss in the PVT system is temperature driven, as the thermal efficiency decreases, electricity generation makes up a larger percentage of the combined output. This study highlights the potential for manufacturers of bespoke thermal absorbers and PV devices to combine their products into a single PVT device that could achieve improved efficiency over a given roof area.

Abstract

Fusion energy, based on the use of broadly available inexhaustible resources as lithium and deuterium and with minimal impact to the environment, aims at a change in the energy supply paradigm: instead of its current dependence on natural resources and environmental impact, energy would become a technology-dependent resource with unlimited adaptive availability and whose unit cost should decrease as technology progresses. This article intends to give a picture of where fusion research stands today and the perspectives: the achievements, the difficulties, the current status, marked by the construction of the ITER experiment which will demonstrate the scientific feasibility of fusion power, and the perspectives toward the first demonstration power plant, DEMO, which, according to the European Roadmap, could start the construction shortly after the full power experiments in ITER (<2030) and be in full operation, generating net electricity into the grid, by 2050.

Abstract

Increasingly tighter regulations regarding organic waste, and the demand for renewable chemicals and fuels, are pushing the manufacturing industry toward higher sustainability to improve cost-effectiveness and meet customers’ demand. Food waste valorization is one of the current research areas that has attracted a great deal of attention over the past few years as a potential alternative to the disposal of a wide range of residues in landfill sites. In particular, the development of environmentally sound and innovative strategies to process such waste is an area of increasing importance in our current society. Landfill, incineration and composting are common, mature technologies for waste disposal. However, they are not satisfactory to treating organic waste due to the generation of toxic methane gas and bad odor, high energy consumption and slow reaction kinetics. In fact, research efforts have also been oriented on novel technologies to decompose organic waste. However, no valuable product is generated from the decomposition process. Instead of disposing and decomposing food waste, recent research has focused on its utilization as energy source (e.g., for bioethanol and biodiesel production). Organic waste is also useful to generate useful organic chemicals via biorefinery or white biotechnology (e.g., succinic acid and/or bio-plastics). This article is aimed to summarize recent development of waste valorization strategies for the sustainable production of chemicals, materials, and fuels through the development of green production strategies. It will also provide key insights into recent legislation on management of waste worldwide as well as two relevant case studies (the transformation of corncob residues into functionalized biomass-derived carbonaceous solid acids and their utilization in the production of biodiesel-like biofuels from waste oils in Philippines, as well as the development of a bakery waste based biorefinery for succinic acid and bioplastic production in Hong Kong) to illustrate the enormous potential of biowaste valorization for a more sustainable society. Future research directions and possible sustainable approaches will also be discussed with their respective proofs of concept.