The Contribution of Ramp Demand in the Capacity of Merge Bottleneck Locations

Abstract

Transportation engineers rely on the Highway Capacity Manual (HCM) for estimating capacity at freeway segments. According to the HCM 2010, the capacity of the basic freeway segments is a function of the free-flow speed and it ranges from 2,400 passenger cars per hour per lane (pc/h/ln) for FFS 70 or 75 mi/h, to 2,250 pc/h/ln for FFS 55 mi/h. The freeway merge segments methodology in the HCM 2010 Update uses these same capacity values in the analysis procedure, although research has shown that capacities at these bottleneck locations are considerably lower. In addition to that, researchers have also observed that capacity varies significantly from day to day and from one site to the other. Researchers acknowledge that driver behavior and frequent interactions between mainline and ramp vehicles at these junctions are the causal factor of these variations in capacity and the low capacity values; however, this has not been reflected in the updated version of the HCM 2010. Furthermore, the HCM 2010 Update does not account for the conflicting movements and the contribution of the ramp vehicles on the overall merge junction capacity. This paper investigates the relationship between freeway and ramp demand and capacity at merge junctions. For the purposes of this research, historic data at merge bottleneck locations across North America with different geometric and operational characteristics were analyzed. The results of the analysis show that, there is a clear correlation between ramp demand, freeway demand and freeway capacity. More specifically, higher demand on the on-ramps produces lower overall capacity values. In addition, this paper proposes new capacity values for merge junctions as a function of the freeway and ramp demand and number of lanes.

Keywords

highway capacity ; merging operations ; bottlenecks ; traffic breakdown

References

1. Brilon, 2005 Brilon, W. (2005). Randomness and Reliability in Freeway Traffic Flow. Delft, Netherlands: TRAIL Research School.
2. Courage, 2009 Courage, K., & Lee, S. (2009). Development of a Central Data Warehouse for Statewide ITS and Transportation Data in Florida, Phase III. Tallahassee: Florida DOT.
3. Elefteriadou, 2003 Elefteriadou, L., & Lertworawanich, P. (2003). Defining, Measuring and Estimating Freeway Capacity. 82nd Annual Meeting of the Transportation Research Board. Washington, DC: TRB.
4. Elefteriadou et al., 2006 Elefteriadou, L., Hall, F., Brilon, W., Roess, R., & Romana, M. (2006). Revisiting the Definition and Measurement of Capacity. 5th International Symposium on Highway Capacity and Quality of Service. Yokohama, Japan: TRB.
5. Elefteriadou et al., 2009 Elefteriadou, L., Kondyli, A.H., Brilon, W., Persaud, B., Jacobson, L., & Washburn, S. (2009). Proactive ramp management under the threat of freeway flow breakdown. Washington, DC: TRB.
6. Elefteriadou et al., 1995 L. Elefteriadou, R.P. Roess, W.R. McShane; Probabilistic Nature of Breakdown at Freeway Merge Junctions; Transportation Research Record, 1484 (1995), pp. 80–89
7. Hall, 1991 F.L. Hall, K. Agyemang-Duah; Freeway Capacity Frop and the Definition of Capacity; Transportation Research Record, 1320 (1991), pp. 91–98
8. Kondyli et al., 2013 Kondyli, A., Elefteriadou, L.B., Hall, F., Persaud, B., & Washburn, S. (2013). Development and Evaluation of Methods for Constructing Breakdown Probability Models. Journal of Transportation Engineering , 931-940.
9. Kondyli et al., 2015 Kondyli, A., St. George, B., & Elefteriadou, L. (2015). Are the Freeway Capacity Values Provided in the Highway Capacity Manual Accurate? Journal of Transportation Engineering .
10. Lorenz, 2001 M. Lorenz, L. Elefteriadou; Defining Freeway Capacity as a Function of Breakdown Probability; Transportation Research Record, 1776 (2001), pp. 43–51
11. Lu and Elefteriadou, 2013 C. Lu, L. Elefteriadou; An investigation of freeway capacity before and during incidents; Transportation Letters: the International Journal of Transportation Research (2013), pp. 144–153
12. Persaud et al., 2001 B. Persaud, S. Yagar, D. Tsui, L. Hook; Study of Breakdown-Related Capacity for a Freeway with Ramp Metering; Transportation Research Record, 1748 (2001), pp. 110–115
13. TRB, 2010 TRB. (2010). Highway Capacity Manual. Washington, DC: Transportation Research Board.