The New Procedures for Diverge, Merge, and Small Weaving Segments in the New Version of German Highway Capacity Manual (HBS 2015)

==Abstract==

The first version of German Highway Capacity Manual was published in 2001. Now, a new version is published in 2015 (HBS 2015). For the new German Highway Capacity Manual, most major chapters are revised and some of them are totally rewritten. The chapter for merge, diverge, and small weaving segments is rewritten in accordance with forthcoming developments in the past 10 years. In this paper, an overview of the chapter in the new German Highway Capacity Manual is presented. Procedures dealing with performance analyses and level of service (LOS) of those segments are introduced both for freeways and rural highways. Differences between the former version and the new version of the chapter in the German Highway Capacity Manual are indicated and discussed. In most of the existing highway capacity manuals, LOS of merge, diverge, and small weaving segments is traditionally defined by speed, volume, or density in critical areas. In that traditional concept several capacity values of different critical areas (merge, diverge, and weaving) as well as upstream and downstream basic segments within the influence areas are evaluated separately. In the new HBS 2015, a new model which considers the total merge, diverge, and weaving segment as an entire object is incorporated. A combined volume-to-capacity ratio (freeways) or a combined density (rural highways) is used for defining the LOS of the total segment. The parameters of the new procedure are functions of the number of lanes of the major road, the number of lanes in the on-ramp or off-ramp, and the predefined geometric design of those segments. The coefficients are calibrated with field data or defined by experts’ experiences within a matrix of coefficients. With those procedures, the traffic quality (LOS) can be obtained directly as a function of the volumes or densities on the major road and on the on-ramp or off-ramp respectively. The new procedure has the following advantages: a) a uniform function for all types of merge, diverge, and small weaving segments, b) traffic quality assessment for all critical areas under investigation in one step, and c) the procedure can easily be calibrated. For applications in practice, a set of graphs is provided.

==Keywords==

Capacity ; Merge ; Diverge ; Small Weaving Segment ; Concept of Level of Service

==References==

<ol style='list-style-type: none;margin-left: 0px;'><li><span id='bib0075'></span>
[[#bib0075|FGSV, 2001]] FGSV (2001). ''Handbuch für die Bemessung von Straßenverkehrsanlagen (HBS) (German Highway Capacity Manual)'' . Forschungsgesellschaft für Straßen- und Verkehrswesen (Ed.), Nr. 299, FGSV Verlag GmbH, Cologne.                                    </li>
<li><span id='bib0010'></span>
[[#bib0010|FGSV, 2008]] FGSV (2008), Richtlinien für die Anlage von Autobahnen (RAA) (Guidelines on the Design of Motorways). Forschungsgesellschaft für Straßen- und Verkehrswesen, Cologne, 2008, translation 2011.</li>
<li><span id='bib0015'></span>
[[#bib0015|FGSV, 2012]] FGSV (2012), Richtlinien für die Anlage von Landstraßen (RAL) (Guidelines on the Design of Rural Roads). Forschungsgesellschaft für Straßen- und Verkehrswesen, Cologne, 2012.</li>
<li><span id='bib0020'></span>
[[#bib0020|FGSV, 2015]] FGSV (2015). ''Handbuch für die Bemessung von Straßenverkehrsanlagen (HBS2015) (German Highway Capacity Manual)'' . Forschungsgesellschaft für Straßen- und Verkehrswesen (Ed.), Nr. 299, FGSV Verlag GmbH, Cologne.                                    </li>
<li><span id='bib0025'></span>
[[#bib0025|TRB, 2000]] TRB (2000). ''Highway Capacity Manual (HCM2000).''  TRB, Transportation Research Board, National Research Council, Washington, D.C.                                    </li>
<li><span id='bib0030'></span>
[[#bib0030|TRB, 2010]] TRB (2010). ''Highway Capacity Manual (HCM2010).''  TRB, Transportation Research Board of the National Acadamies, Washington, D.C.                                    </li>
<li><span id='bib0035'></span>
[[#bib0035|Brilon and Westphal, 1994]] Brilon, W., Westphal, S. (1994). Bemessung von Einfahrten an planfreien Knotenpunkten (Traffic quality of merge segments). ''Forschung Straßenbau und Straßenverkehrstechnik'' , No. 671.                                    </li>
<li><span id='bib0040'></span>
[[#bib0040|Brilon and Betz, 2008]] Brilon, W., Betz, C. (2008). Entwurf und Bemessung von Autobahnknotenpunkten unter Beruecksichtigung der Wechselwirkungen zwischen den Elementen (Design and evaluation of motorway intersections, considering the interacctions between elements'')'' . ''Forschung Straßenbau und Straßenverkehrstechnik'' , No. 983.                                    </li>
<li><span id='bib0045'></span>
[[#bib0045|Brilon et al., 2007]] Brilon, W.; Geistefeldt, J.; Lippold, C.; Kuczora, V. (2007): Autobahnen und Autobahnknotenpunkte mit vierstreifigen Richtungsfahrbahnen – Gestaltung und Bemessung (Planning and design of motorway sections and interchanges with four-lane carriageways), ''Forschung Straßenbau und Straßenverkehrstechnik'' , No. 967.                                    </li>
<li><span id='bib0050'></span>
[[#bib0050|Friedrich et al., 2006]] Friedrich, B., Irzik, M., Hoffmann, S. (2006). Verkehrsablauf an Autobahnausfahrten des Typs A 2 der RAL-K-2 (Traffic quality of diverge segment typ A2). ''Forschung Straßenbau und Straßenverkehrstechnik'' , No. 946.                                    </li>
<li><span id='bib0055'></span>
[[#bib0055|Friedrich et al., 2008]] Friedrich, B., Hoffmann, S., Irzik, M., Matschke, I. (2008). Zweistreifige Einfahrten an dreistreifigen Richtungsfahrbahnen – Verkehrssicherheit, Verkehrsablauf (Two-lane on-ramps on three-lane freeways). ''Forschung Straßenbau und Straßenverkehrstechnik'' , No. 992.                                    </li>
<li><span id='bib0060'></span>
[[#bib0060|Weiser et al., 2006]] Weiser, F., Sillus, A., Lippold, C. (2006). Verkehrssicherheit und Verkehrsablauf an planfreien Knotenpunkten mit Fahrstreifensubtraktion (Traffic quality of diverge segments with lane reduction on major freeway). ''Forschung Straßenbau und Straßenverkehrstechnik'' , No. 936.                                    </li>
<li><span id='bib0065'></span>
[[#bib0065|Wu, 1997]] Wu, N. (1997). Capacity of Shared-short Lanes at Unsignalized Intersections. ''Proceedings of the Third International Symposium on Intersections without Traffic Signals'' , Portland, Oregon.                                    </li>
<li><span id='bib0070'></span>
[[#bib0070|Wu and Lemke, 2011]] Wu, N., Lemke K. (2011). A new Model for Level of Service of Freeway Merge, Diverge, and Weaving Segments. ''Procedia Social and Behavioral Sciences, 6th International Symposium on Highway Capacity and Quality of Service.''  Volume 16, Elsevier, Stockholm, Sweden, June 28 – July 1.                                    </li>
</ol>