Latest revision as of 12:11, 5 April 2017

Abstract

Around 1995 the need for a Dutch Highway Capacity Manual (HCM) was felt within Rijkswaterstaat (Rijkswaterstaat is the executive body of the Dutch Ministry of Infrastructure and the Environment). Previously the American HCM was used, but specific circumstances in the Netherlands made it necessary to develop a Dutch HCM. This led to the introduction of the Dutch HCM, Handboek Capaciteitswaarden Infrastructuur Autosnelwegen in 1999, followed by the 2nd edition in 2002. Then, after a long period a completely new 3rd edition was published in 2011 and a fourth edition was completed in 2015. More than 15 years of research on highway capacities and the experience in using the manual has resulted in a practical handbook with an obligation to use it in planning studies for new and renewed highways in the Netherlands. The manual is one of the guidelines implemented in a working process system for planning studies. Although different indicators have been used over the years in transportation policy, the volume-to-capacity ratio is still the main indicator for the traffic flow quality in the Dutch HCM. Before the introduction of the Dutch HCM (< 1999) this indicator had been used most frequently. The most recent fourth version of Dutch HCM includes the research of capacities of tapers, cloverleaves, rush hour lanes and 4 lanes freeways. Weaving sections received special attention, as they are still simulated with the microsimulation model FOSIM. The new information was mostly added after requests of users. Because of a bigger role of consultants and less involvements of experts of Rijkswaterstaat in the highway designing process, guidelines become much more obligatory and nowadays contain specific minimum values and other specifications of the highway elements. Analysis has also been performed of capacity measurements at more than 200 locations. The influence of, among others, lane width, speed limit, absence of emergency lanes, tunnels and bridges have been analyzed. Also different road work configurations have been analyzed. The results from these analyses have been used in the fourth version of the Dutch HCM to state the influence of different infrastructure elements on the capacity and to validate and update previously stated values.

Keywords

Dutch HCM ; road design ; managed lanes ; traffic management ; FOSIM ; highway capacity

References

1. Al-Kaisy and Hall, 2002 Al-Kaisy, A., & Hall, F. (2002). Guidelines for Estimating Freeway Capacity at Long-Term Reconstruction Zones. Transportation Research Board 81st Annual Meeting , 35.
2. Arane, 2007 Arane; Onderzoek Verkeersafwikkeling en capaciteitswaarden discontinuïteiten Autosnelwegen (2007)
3. Arcadis, 2004 Arcadis; Capaciteitsmetingen 4-0-systeem Zwolle (2004)
4. Arcadis, 2013a Arcadis; Capaciteitsmetingen herziening Handboek CIA; Onderdeel C: Metingen op basis van beschikbare data (2013)
5. Arcadis, 2013b Arcadis; Capaciteitsmetingen Herziening Handboek CIA; Onderdeel D: Metingen op basis van externe apparatuur (2013)
6. Arcadis, 2015 Arcadis. (2015). Capaciteitsmetingen 2015.
7. Botma and Dijker, 2001 Botma, H., & Dijker, T. (2001). Cursus Fosim. Delft University of Technology.
8. Brilon et al., 2005 Brilon, W., Geistefeldt, J., & Regler, M. (2005). Reliability of Freeway Traffic Flow: A stochastic Concept of Capacity. Proceedings of the 16th International Symposium on Transportation and Traffic Theory , 125-144.
9. CROW, 2013 CROW. (2013). Maatregelen op autosnelwegen; Werk in Uitvoering 96a. CROW.
10. Daamen et al., 2012 Daamen, W., Heikoop, H., Goemans, J., & Hoogendoorn, S. (2012). Freeway Infrastructure Capacity Manual: an Updated Version of the Dutch Guidelines. Transportation Research Board 91st Annual Meeting , 14.
11. Grontmij, 2015 Grontmij. (2015). Capaciteitswaarden Infrastructuur Autosnelwegen; Handboek, versie 4. De Bilt: Rijkswaterstaat Water, Verkeer en Leefomgeving.
12. Henkens and Abma, 2015 Henkens, N., & Abma, R. (2015). Analyse metingen capaciteits-waarden 2005-2015; Ten behoeve van Handboek CIA v4. De Bilt: Grontmij Nederland B.V.
13. Kraaijeveld and Hennink, 2013 Kraaijeveld, R., & Hennink, H. (2013). Ontwerp en Inrichting Spitsstroken. Delft: Rijkswaterstaat Water, Verkeer en Leefomgeving.
14. Minderhoud et al., 1997 Minderhoud, M. M., Botma, H., & Bovy, P. H. (1997). Assesment of Roadway Capacity Estimation Methods. Transportation Research Record 1572, TRB .
15. Minderhoud and Kirwan, 2001 Minderhoud, M., & Kirwan, K. (2001). Validatie FOSIM voor asymmetrische weefvakken - CAPWEEF fase 1. Delft University of Technology.
16. Ministerie van, 1988 V.W. Ministerie van, VROM; Tweede Structuurschema Verkeer en Vervoer (1988)
17. Ministerie van, 2001 V.W. Ministerie van, VROM; Nationaal Verkeers- en Vervoersplan (2001), pp. 2001–2020
18. Rijkswaterstaat, 1999 Rijkswaterstaat; Adviesdienst Verkeer en Vervoer. Capaciteitswaarden Infrastructuur Autosnelwegen; Handboek (1999)
19. Rijkswaterstaat Dienst and Verkeerskunde, 1973 Rijkswaterstaat Dienst Verkeerskunde. (1973). Nota nr. 73-11; Afwikkelingsniveau’ s 1971 en Ongevallen frequenties 1971 op de rijkswegen. Den Haag.
20. Rijkswaterstaat and Witteveen, 2014 Rijkswaterstaat GPO and Witteveen + Bos. (2015). Richtlijn Ontwerp Autosnelwegen 2014; ROA2014. Rijkswaterstaat.
21. Schuurman, 2002 Schuurman, H. (2002). Capaciteitswaarden Infrastructuur Autosnelwegen; Handboek, versie 2. Rijkswaterstaat Adviesdienst Verkeer en Vervoer.
22. Toorenburg, 1986 Toorenburg, J. v. (1986). Praktijkwaarden voor de capaciteit. Rijkswaterstaat dienst Verkeerskunde.
23. Van Rij and Henkens, 2009 Van Rij, M., & Henkens, N. (2009). Capaciteitsmetingen Autosnelwegen; Samenvatting van de resultaten voor 75 locaties. De Bilt: Grontmij Nederland B.V.
24. Vermijs, 1997 Vermijs, R. (1997). CIA-1; Capaciteitswaarden symmetrische weefvakken. Delft University of Technology.
25. Voorrips, 2013 Voorrips, R. (2013). Freeway work zone driving behaviour; The influence of work zone configurations. Delft University of Technology (master thesis).
26. Witteveen, 2011 Witteveen + Bos and TU Delft. (2011). Capaciteitswaarden Infrastructuur Autosnelwegen; Handboek, versie 3. Rijkswaterstaat Dienst Verkeer en Scheepvaart.