Latest revision as of 12:11, 5 April 2017

Abstract

Urban and rural intersections differ in terms of functionality. They support traffic which differs in terms of travel goals and motivations. In urban areas, these goals are mainly related to work, home, shopping and recreation. On the other hand, rural intersection mainly support through traffic between towns and cities and regions, with a small admixture of local traffic. Comparison of the characteristics of traffic flows indicates that towns and cities have heavier traffic flows, mainly of light vehicles, and frequent congestion states, while rural areas reveal smaller traffic flow and its structure is more diverse and involves vehicles travelling at higher speeds. The structure of traffic directions at rural intersections, usually dominated by traffic moving along one of the intersecting roads, differs substantially from the structure of the same at urban intersections. In order to control traffic, rural intersections increasingly rely on varied in time traffic signals, with a preference strategy whenever there is absence of excitation of motion detectors by the participants. The scope of intersections expansion and traffic control algorithms are more varied at urban intersections. Rural intersections are mainly controlled based on three major driving phases. Differences in intersections locations and the specificity of traffic conditions and traffic control imply drivers’ different needs and behaviour. Hence it is important to conduct comparative analyses of urban and rural intersections. The paper will present analysis of variability of saturation flows and capacity and traffic performance based on empirical studies of intersections in 2008 – 2012, both in urban and rural areas. Differences in drivers’ needs and behaviour in rural areas, the specific distribution of types of vehicles and directions on the lanes (single carriageway and dual carriageway) translate into slower vehicle service processes. Smaller values of saturation flow and capacity in rural areas mean that significant periodic increases in traffic flow lead to congestion states much faster than in urban areas. Although in rural areas these states are rather rare for the main direction, they are much more common at entries to the main road. The seasonal variability of traffic makes the functioning of these intersections differ between business (non-recreational) and recreational traffic (e.g. during the holiday season). The paper will also address the issue of acceptance of difficult traffic conditions in the states of traffic overload from the point of view of the road managers and the driver, referring to the reliability of intersection entries in urban and rural areas.

Keywords

Traffic performance ; saturation flow ; capacity ; empirical research ; traffic signals ; reliabilty

References

1. Chodur, 2012 J. Chodur; Characteristics of traffic flows on rural intersections with traffic signals; International Railway Journal, 9/2012 (2012), pp. 4629–4638
2. Chodur et al., 2011a J. Chodur, M. Tracz, S. Gondek, K. Ostrowski, R. Bąk; Operational problems at intersections with traffic signals located on rural high-speed roads; PBW N N509 498638, NCN, Warsaw 2009-2011, Poland (2011)
3. Tracz et al., 2001 M. Tracz, J. Chodur, S. Gaca; Guidelines For Design Of At-Grade Intersections. General Directorate of National Roads and Motorways, Warsaw; Poland (2001)
4. Rozporządzenie, 2008 Rozporządzenie Ministra Infrastruktury z dnia 3 lipca 2003 roku w sprawie szczegółowych warunków technicznych dla znaków i sygnałów drogowych oraz urządzeń bezpieczeństwa ruchu drogowego i warunków ich umieszczania na drogach. Dz. U. nr 220, poz. 2181 z dnia 23 grudnia 2003 r. oraz późniejsze zmiany: Dz. U. nr 67, poz. 413 z 2008 r. i Dz. U. nr 126, poz. 813 z 2008 r.
5. The Geometric, 2004 The Geometric; Layout of Signal-Controlled Junctions and Signalised Roundabouts. Design Manual for Roads and Bridges, Volume 6 Road Geometry Section 2 Junctions; The Highways Agency, Scottish Executive, Welsh Assembly Government, The Department For Regional Development Northern Ireland TD 50/ (2004), p. 04
6. Chodur et al., 2004 J. Chodur, M. Tracz, S. Gaca, S. Gondek, M. Kieć, K. Ostrowski; Manual for capacity analyses of at-grade intersections. General Directorate of National Roads and Motorways; Warsaw, Poland (2004)
7. Ostrowski, 2013 Ostrowski, K. (2013). Variability of demand flow to intersections with signals in analyses of their operating reliability , Prace naukowe Politechniki Warszawskiej, Transport z. 95: Inteligentne Systemy Transportowe i Sterowanie Ruchem w Transporcie, pp. 391-400, Warsaw, Poland.
8. Ostrowski, 2014 Ostrowski, K. (2014). Attempt to apply the theory of reliability to assessment of signalised lane operation. Proc. of European Safety and Reliability Conference ESREL, Safety and Reliability, Methodology and applications, CRC Press/Balkena, Taylor and Francis Group, pp. 335-341, Wrocław, Poland.
9. Ostrowski, 2010 Ostrowski, K. (2010). Reliability of signalized intersection operation at variable saturation flows (in Polish). Ph.D. Thesis, Cracow University of Technology, Cracow, Poland.
10. Gaca et al., 2008 S. Gaca, W. Suchorzewski, M. Tracz; Traffic engineering; WKiŁ, Warsaw (2008)
11. Chodur et al., 2011b J. Chodur, K. Ostrowski, M. Tracz; Impact of saturation flow changes on performance of traffic lanes at signalized intersections; Proceedings of the 6th International Symposium on Highway Capacity and Quality of Service, Stockholm, Sweden (2011), pp. 600–611
12. Teply, 2008 S. Teply; Canadian capacity guide for signalized intersections; The Institute of Transportation Engineers, Canada (2008)
13. Akcelik, 1989 R. Akcelik; Traffic signals - capacity and timing analysis; Australian Road Research Board, Research Report 123 (1989)
14. Handbuch, 2001 Handbuch; für die Bemessung von Straßenverkehrsanlagen; Forschungsgesellschaft für Straßen- und Verkehrswesen e.V., Köln (2001)
15. Highway Capacity Manual, 2010 Highway Capacity Manual (2010). TRB. Washington D.C., USA.
16. Perez-Cartagena and Tarko, 2005 R.I. Perez-Cartagena, A.P. Tarko; Calibration of capacity parameters for signalized intersections in Indiana TRB (2005)
17. Tracz and Ostrowski, 2012 M. Tracz, K. Ostrowski; Impact of capacity variability in different weather conditions on reliability of signalised intersections; Proc. of The 5th International Symposium on Transportation Network Reliability, Hong Kong (2012), pp. 901–916
18. Ostrowski and Tracz, 2015 K. Ostrowski, M. Tracz; Availability and reliability of a signalised lane; Proc. of the 6th International Symposium on Transportation Network Reliability, Japan (2015)
19. Ostrowski and Chodur, 2015 K. Ostrowski, J. Chodur; Performance and reliability of signalised intersections; Road and Transportation Engineering, Edytor Gaca S., Seria Inżynieria Lądowa, Monografia 483, Politechnika Krakowska, Kraków (2015), pp. 33–50
20. Migdalski, 1982 J. Migdalski; Poradnik niezawodności; Podstawy matematyczne. WEMA, Warsaw, Poland (1982)
21. Jaźwiński and Borgoń, 1989 J. Jaźwiński, J. Borgoń; Niezawodność eksploatacyjna i bezpieczeństwo lotów; WKiŁ Warsaw, Poland (1989)