Latest revision as of 12:12, 5 April 2017

Abstract

The paper is based on a project carried out to develop a new concept for the assessment of highway performance considering multi-modality, traffic management and ITS. Step by step a single-mode concept like it is used in the Austrian guidelines is extended to a multi-modal transport approach taking into account the capacity and quality of different modes on the road as well as in the corridor. By showing different options of meeting the quality target of road traffic this concept is aiming at a more efficient and cost effective use of traffic infrastructure and supporting the efficient allocation of limited funds.

In order to allow for multi-modal considerations, transport demand has to be measured in persons and goods rather than in vehicle units. For the assessment of roads this combines the utilization of traffic capacity in terms of vehicles with the utilization of vehicle capacity in terms of occupancy and loading. So a multi-modal approach has to consider the characteristics and potentials of public transport on the road and of alternative means of transport in the corridor. The corridor comprises the road that has to be assessed as well as all parallel means of transport. The whole transport demand in passengers and goods using this corridor is taken into account. Corridor capacity results from the capacity of all means of transport. However, since the concept still focuses on the assessment of highway performance the transport contribution of the other means of transport is considered as reduction of the transport demand and hence of traffic load on the road.

To finally assess the level of service on the road different criteria can be used. So the implications of using travel speed or reliability of travel time which is related to capacity utilization are discussed. Especially in hilly or mountainous regions a speed based assessment can result in problems due to unreasonable alignment and expensive road construction. Therefore the influences of different design parameters, horizontal alignment and grade as well as the traffic mix (proportions of heavy vehicles) on speed and capacity are analyzed in detail.

The extended concept of road assessment is allowing multi-modal capacity utilization and capacity management to meet quality targets of road traffic. It supports the identification of different scenarios how transport demand can be accommodated adequately. It extends the range of suitable measures to respond to unsatisfactory quality of road traffic. Apart from road improvements it allows for management measures controlling a given demand rather than just accommodating it.

Keywords

assessment ; level of service ; multi-modal ; traffic management

References

1. Brilon et al., 1994 W. Brilon, M. Grossmann, H. Blanke; Verfahren zur Berechnung der Leistungsfähigkeit und Qualität des Verkehrsablaufes auf Straßen. s.l. : Forschung Straßenbau und Straßenverkehrstechnik Heft, 669 (1994), p. 1994
2. FGSV, 2015 FGSV (2015). Handbuch für die Bemessung von Straßenverkehrsanlagen. Köln : Forschungsgesellschaft für Straßen- und Verkehrswesen, 2015.
3. FGSV, 2002 FGSV (2002). Handbuch für die Bemessung von Straßenverkehrsanlagen. Köln : Forschungsgesellschaft für Straßen- und Verkehrswesen, 2002.
4. FSV, 2012 FSV (2012). RVS 03.01.11: Beurteilung des Verkehrsablaufs auf Straßen. Forschungsgesellschaft Straße-Schiene-Verkehr : s.n., 2012.
5. FSV, 1994 FSV (1994). RVS 3.7: Überprüfung der Anlageverhältnisse von Straßen. Wien : Forschungsgemeinschaft für Verkehrs- und Straßenwesen, 1994.
6. Knoflacher et al., 2008 Knoflacher, H., et al. (2008). Multimodale Dimensionierung von Straßen. Wien : TUW-IVV, 2008.
7. Mailer, 2004 Mailer, M. (2004). Considering Multi-Modal Capacity in the Assessment of Road Design. [book auth.] C. Focas. Transport Issues and Problems in Southeastern Europe. s.l. : Ashgate Publishing Limited, 2004, pp. 229-240.
8. Mailer, 2001 Mailer, M. (2001). Wie mobil ist die Gesellschaft? s.l. : Wissenschaft und Umwelt INTERDISZIPLINÄR, Nr. 3, S. 35-42, 2001.
9. Mailer et al., 2008 Mailer, M., et al. (2008). Verkehrsqualität auf Hauptverkehrsstraßen - Empfindung, Messung und Bewertung. s.l. : Internationales Verkehrswesen (7+8), S.270, 2008.
10. Schafer, 2000 Schafer, A. (2000). Regularities in Travel Demand: An International Perspecticve. s.l. : Journal of Transportation and Statistics, December, 2000.
11. Schafer, 1998 Schafer, A. (1998). The Global Demand for Motorized Mobility. s.l. : Transportation Research Part A, 32 (6), 455-477, 1998.
12. TRB, 2001 TRB (2001). Highway Capacity Manual, Fourth Edition. s.l. : Transport Research Board, 2001.
13. TRB, 1994 TRB (1985, 1994). Highway Capacity Manual, Third Edition 1985, Updated 1994 . s.l. : Transport Research Board 1985, 1994.
14. TRB, 2010 TRB (2010). Highway Capcity Manual, Fith Edition. s.l. : Transportation Research Board, 2010.