Documents published in Scipedia

• Optimization and comparison analysis for application of PV panels in three villages

  M. Fadaeenejad, M. Radzi, M. Fadaeenejad, M. Zarif, Z. Gandomi

  Energy Science & Engineering (2017).

  
  

  Abstract

  In recent years, research about the application and optimization of PV panels has grown rapidly. Especially for stand-alone solar systems there have been some problems related to first stages of design and application. Finding the optimum slope of PV panels in order to maximize the absorbed solar radiation is considered as one of the major obstacles. Although in Malaysia there have been some research works about finding of optimal tilt angle, however, this research work aims to start investigation about slope of PV panels for three villages without electricity and prior research. The Liu and Jordan model is applied to find the monthly optimal tilt angle and fixed tilt angle for the application of solar energy in these rural locations. The results demonstrate that the optimal tilt angle in these locations is less than 5°.

  Abstract
  In recent years, research about the application and optimization of PV panels has grown rapidly. Especially for stand-alone solar systems there have been some problems related [...]

  • 0
  •  read

• Oxyfuel combustion in rotary kiln lime production

  M. Eriksson, B. Hökfors, R. Backman

  Energy Science & Engineering (2017).

  
  

  Abstract

  The purpose of this article is to study the impact of oxyfuel combustion applied to a rotary kiln producing lime. Aspects of interest are product quality, energy efficiency, stack gas composition, carbon dioxide emissions, and possible benefits related to carbon dioxide capture. The method used is based on multicomponent chemical equilibrium calculations to predict process conditions. A generic model of a rotary kiln for lime production was validated against operational data and literature. This predicting simulation tool is used to calculate chemical compositions for different recirculation cases. The results show that an oxyfuel process could produce a high-quality lime product. The new process would operate at a lower specific energy consumption thus having also a reduced specific carbon dioxide emission per ton of product ratio. Through some processing, the stack gas from the new process could be suitable for carbon dioxide transport and storage or utilization. The main conclusion of this paper is that lime production with an oxyfuel process is feasible but still needs further study.

  Abstract
  The purpose of this article is to study the impact of oxyfuel combustion applied to a rotary kiln producing lime. Aspects of interest are product quality, energy efficiency, [...]

  • 0
  •  read

• Tip speed ratio control of a 200 kW VAWT with synchronous generator and variable DC voltage

  S. Eriksson, J. Kjellin, H. Bernhoff

  Energy Science & Engineering (2017).

  
  

  Abstract

  A novel control method for a fixed-pitch variable speed wind turbine is introduced and experimental results are presented. The measured absorbed power and rotational speed, together with a look-up table for the aerodynamic efficiency, are used to estimate the wind speed reaching the turbine as well as the tip speed ratio. Thereby, the control is independent on wind speed measurements and the wind turbine itself is used as an anemometer. Tip speed ratio control is implemented by comparing the estimated tip speed ratio to a reference value and adjusting the DC voltage level accordingly. Tip speed ratio control benefits from that the aerodynamic efficiency hardly varies with changing tip speed ratio when close to its optimum value. Experimental results from a 200 kW vertical axis wind turbine are presented. The voltage from the permanent magnet generator is passively rectified and the alternating DC voltage is then inverted, filtered, transformed, and grid connected. The estimated wind speed is compared with the measured wind speed. The absorbed power when tip speed ratio control has been implemented is shown. It is concluded that the presented control method works and some future improvements are discussed.

  Abstract
  A novel control method for a fixed-pitch variable speed wind turbine is introduced and experimental results are presented. The measured absorbed power and rotational speed, [...]

  • 0
  •  read

• Experimental study of the effect of inhibitors in wax precipitation by different techniques

  B. Coto, C. Martos, J. Espada, M. Robustillo, J. Peña

  Energy Science & Engineering (2017).

  
  

  Abstract

  The blocking problems in equipment and flowlines caused by precipitation of wax solids is a well-known problem and large research efforts have been focused on developing procedures dealing with wax deposition. Among the different alternatives, the use of chemicals is frequently used to inhibit wax precipitation. The presence of these compounds modifies the size and/or the shape of the paraffinic solids, thus affecting their flow behavior and cold properties. In this work, a methodology based on different experimental techniques was developed to study the effect of different additives on the crude oil behavior at low temperature. Four commercial inhibitors were added to three crude oils in different concentrations. The effect of the inhibitors on wax precipitation was studied using differential scanning calorimetry (DSC) and cross-polarized microscopy (CPM). Obtained results for wax appearance temperature (WAT) using DSC do not show remarkable differences regarding the presence of inhibitor. However, CPM analyses revealed differences in both size and shape of paraffin solids. The results obtained in this work reveal that in some cases the inhibitor does not modify the WAT values, but the morphology of the precipitated particles. In these cases, it is necessary to combine DSC and CPM analyses to obtain reliable results.

  Abstract
  The blocking problems in equipment and flowlines caused by precipitation of wax solids is a well-known problem and large research efforts have been focused on developing procedures [...]

  • 0
  •  read

• Enhanced biogas production from coffee pulp through deligninocellulosic photocatalytic pretreatment

  G. Corro, U. Pal, S. Cebada

  Energy Science & Engineering (2017).

  
  

  Abstract

  Production of biogas utilizing agricultural wastes is one of the most demanding technologies for generating energy in sustainable manner considering environmental concerns. However, though the agricultural wastes are available in abundance, the technologies used for the production of biogas such as biological and thermochemical processes are not very efficient. In the present article, we describe a process for the production of biogas from coffee pulp utilizing Cu/TiO2 as an efficient photocatalyst in its solar photocatalytic pretreatment, producing biogas of high caloric value at enhanced rate. The pretreatment process enhances the coffee pulp–cattle manure codigestion, producing increased amounts of methane, propane, and other combustible components of biogas. The photocatalytic pretreatment was performed using 10%Cu/TiO2 as photocatalyst, bubbling air as oxidizing agent, and solar radiation as light source. The process enhances the degradation rate of lignocellulosic components of coffee pulp, consequently increasing the biogas production through anaerobic codigestion. The mechanism of photocatalytic degradation of lignocelluloses has been discussed. The results presented in this work indicate the photocatalytic pretreatment is a useful process to increase biogas generation from lignocelluloses-rich natural wastes.

  Abstract
  Production of biogas utilizing agricultural wastes is one of the most demanding technologies for generating energy in sustainable manner considering environmental concerns. [...]

  • 0
  •  read

• Photovoltaics: between a bright outlook and uncertainty

  P. Berberi, S. Thodhorjani, P. Hoxha, V. Muda

  Energy Science & Engineering (2017).

  
  

  Abstract

  There is “breakneck” growth in the global photovoltaics market, with the global market of photovoltaic cells growing by about 47% in 2009, 72% in 2010, and 74% in 2011. Global installed capacity in 2011 was three times more than 2009. Italy and Germany are leading with a 57% share of the global market. Costs are dropping rapidly and photovoltaic (PV) power generation is an attractive option for investors. Increasing support of European Union (EU) for renewable energy in general and PV aims to diversify sources of energy and reduce reliance on fossil fuels, on nuclear and on imported energy. Energy security is an important dimension for the EU. Almost all experts agree that there is no single technology that will provide a sustainable global supply of cleaner energy. However, the scale, the cost of the change needed and supporting policy and legislation are often subject to debate. High costs could be counterbalanced by economic yields from new businesses, the creation of new jobs, and economic growth from clean energy investments. The current situation in which Germany and Italy account for almost 2/3 of global PV market growth and, also, the strong reliance on supporting policies is unstable. If PV power generation is to continue growing, the balance of development will have to shift to new markets – both inside and outside of Europe. Fixed price policy is a game to be played with caution. This article highlights examples of Spain, Italy, and Germany that illustrate that without robust policy the system can be easily misbalanced. When – or even if – photovoltaic power does become cheap enough to compete without subsidies against more established energy sources, depends upon a number of uncertainties, including the continuing political will to provide financial support, and how readily developing nations such as China and India embrace renewable energies.

  Abstract
  There is “breakneck” growth in the global photovoltaics market, with the global market of photovoltaic cells growing by about 47% in 2009, 72% in 2010, and 74% in 2011. [...]

  • 0
  •  read

• Fuel-mix and energy utilization analysis of Port Harcourt Refining Company, Nigeria

  I. Badmus, R. Fagbenle, O. Oyewola

  Energy Science & Engineering (2017).

  
  

  Abstract

  This study analyses the fuel-mix and energy utilization patterns in Port Harcourt Refining Company from 2000 to 2011. The average fuel mix over the study period is 43% refinery fuel gas, 0% liquefied petroleum gas (LPG), 44% low pour fuel oil (LPFO), 8% Coke, and 5% automotive gas oil (AGO). The present ratio of high-carbon fuel consumption to low-carbon fuel consumption adversely influences the specific fuel consumption by increasing it. Our proposal is that the present AGO and LPFO consumption levels are totally replaced with equivalent amounts of natural gas. This would yield the following fuel mix: 46% refinery fuel gas, 46% natural gas, and 8% coke. This, in effect, would result in a proportion of 92% low-carbon fuels and 8% coke. It would also lead to a specific fuel consumption that is averagely unaffected by high-carbon/low-carbon fuel consumption ratios. Natural gas utilization has its main advantage in its flare/waste and consequent environmental degradation reduction. Finally, the proposed fuel mix would generally lead to a reduction in specific fuel consumption, thus saving energy and reducing costs.

  Abstract
  This study analyses the fuel-mix and energy utilization patterns in Port Harcourt Refining Company from 2000 to 2011. The average fuel mix over the study period is 43% refinery [...]

  • 0
  •  read

• Advances on waste valorization: new horizons for a more sustainable society

  R. Arancon, C. Lin, K. Chan, T. Kwan, R. Luque

  Energy Science & Engineering (2017).

  
  

  Abstract

  Increasingly tighter regulations regarding organic waste, and the demand for renewable chemicals and fuels, are pushing the manufacturing industry toward higher sustainability to improve cost-effectiveness and meet customers’ demand. Food waste valorization is one of the current research areas that has attracted a great deal of attention over the past few years as a potential alternative to the disposal of a wide range of residues in landfill sites. In particular, the development of environmentally sound and innovative strategies to process such waste is an area of increasing importance in our current society. Landfill, incineration and composting are common, mature technologies for waste disposal. However, they are not satisfactory to treating organic waste due to the generation of toxic methane gas and bad odor, high energy consumption and slow reaction kinetics. In fact, research efforts have also been oriented on novel technologies to decompose organic waste. However, no valuable product is generated from the decomposition process. Instead of disposing and decomposing food waste, recent research has focused on its utilization as energy source (e.g., for bioethanol and biodiesel production). Organic waste is also useful to generate useful organic chemicals via biorefinery or white biotechnology (e.g., succinic acid and/or bio-plastics). This article is aimed to summarize recent development of waste valorization strategies for the sustainable production of chemicals, materials, and fuels through the development of green production strategies. It will also provide key insights into recent legislation on management of waste worldwide as well as two relevant case studies (the transformation of corncob residues into functionalized biomass-derived carbonaceous solid acids and their utilization in the production of biodiesel-like biofuels from waste oils in Philippines, as well as the development of a bakery waste based biorefinery for succinic acid and bioplastic production in Hong Kong) to illustrate the enormous potential of biowaste valorization for a more sustainable society. Future research directions and possible sustainable approaches will also be discussed with their respective proofs of concept.

  Abstract
  Increasingly tighter regulations regarding organic waste, and the demand for renewable chemicals and fuels, are pushing the manufacturing industry toward higher sustainability [...]

  • 0
  •  read

• Use of nonimmobilized enzymes and mediators achieved high power densities in closed biobatteries

  Z. Zhu, Y. Zhang

  Energy Science & Engineering (2017).

  
  

  Abstract

  The immobilization of redox enzymes on the surface of electrodes is a typical practice for enzymatic fuel cells (EFCs) but enzyme immobilization usually results in low retaining enzymatic activities and low power densities. Here, we investigated an alternative solution – the use of nonimmobilized thermostable enzymes (e.g., NAD-based glucose 6-phosphate dehydrogenase and flavin-containing diaphorase) and a nonimmobilized mediator (i.e., benzyl viologen or 9, 10-anthraquinone-2, 7-disulphonic acid, AQDS) for achieving high power densities from glucose 6-phosphate in closed EFCs (called biobatteries). At the same enzyme loading, power densities of biobatteries increased in an order from the case of immobilized enzymes and immobilized vitamin K3 to the case of nonimmobilized enzymes and immobilized vitamin K3 to the case of nonimmobilized enzymes and nonimmobilized AQDS. The maximum power density of the biobattery based on nonimmobilized enzymes and AQDS was 1.1 mW cm−2 of anode at room temperature, 34-times of the biobattery based on immobilized enzymes and immobilized vitamin K3. When enzyme loading was increased by another 10-fold, the highest power density of biobattery was increased to 2.4 mW cm−2 at 37°C. The biobattery based on nonimmobilized enzymes and AQDS retained 60% of its initial current density after running for 2 h. When repeatedly being used for 6 rounds, the biobattery had 35% of its initial current density after 12 days. Our results suggest that closed biobatteries equipped with nonimmobilized thermostable enzymes and mediators feature simple system configuration and have high power densities.

  Abstract
  The immobilization of redox enzymes on the surface of electrodes is a typical practice for enzymatic fuel cells (EFCs) but enzyme immobilization usually results in low retaining [...]

  • 0
  •  read

• Study of a new hydraulic pumping unit based on the offshore platform

  Y. Yu, Z. Chang, Y. Qi, X. Xue, J. Zhao

  Energy Science & Engineering (2017).

  
  

  Abstract

  This article introduces a new technology about a rod pumping in the offshore platform according to the demand of offshore heavy oil thermal recovery and the production of stripper well, analyzes the research status of hydraulic pumping unit at home and abroad, and designs a new kind of miniature hydraulic pumping unit with long-stroke, low pumping speed and compact structure to resolve the problem of space limitation. The article also describes the whole structure and the working principle of this pumping unit, determines the choice of stroke and rate of the pumping unit, and establishes mathematical models based on the polished rod loads. A new composite hydraulic cylinder with a special structure was designed by combining the hydraulic cylinder with the energy accumulator. This composite hydraulic cylinder is applied on land, and the model prototype runs smoothly, which indicates that the whole structure design of the pumping unit is reasonable and the control strategy is correct.

  Abstract
  This article introduces a new technology about a rod pumping in the offshore platform according to the demand of offshore heavy oil thermal recovery and the production of [...]

  • 0
  •  read