The free vibration of the sewing needle is divided into lateral free vibrations and an axial free vibration. In this work a theoretical study that concerns the free lateral vibrations will be applied to the sewing needle by the use of Gorman’s Eigen values (Daniel, 1975) technique. The study will be divided into the following: needles with constant cross-section (with classical and non classical boundary conditions) and needles with variable cross-section (conical and stepped). For all the different shapes of needles (Gorman’s classifications) the linear natural frequency in stitches per min (SPM) will be calculated by the use of Gorman’s Eigen values via special tables and graphs. It was found that the linear fundamental natural frequencies of the following: clamped free sewing needle (CF) is 21,548 SMP, clamped simple sewing needle (CS) is 94,522 SMP while for free–free needle (FF) for n = 2 is 137,130 SMP. For each type the Eigen value β was selected due to the sewing needle boundary conditions. The ratio between the lowest (CF) linear natural frequency and the highest (FF) one is 16%. In this work the selected sewing needle material was steel with E = 206 GPa and specific weight 785,000 N/m3.
Free vibration; Sewing needle design; Working speed of sewing needle
Panovko [7] in his work has stated that it is difficult to indicate a domain of Engineering in which the study of elastic vibrations would not be urgent problem. Much attention is given by investigators to vibrations of structures of widely differing purposes: turbine rotors, aircraft, turbine blades, etc. Nowadays the garments and apparel industry are considered vital Engineering areas that require an emphasizing on its mechanical – machines – side such as the industrial sewing machines that have an important element i.e. the sewing needle where, it is a metallic bar from steel with a special configuration and structure. It is the highly accelerated part in the sewing machine where it has max allowable speed = 15 k SPM. The sewing needles have been subjected to too little studies that concern its vibration free, forced, modes, etc., to calculate the working speed of sewing needle. It is necessary to study its free vibration frequencies; in certain cases the vibrations impede the normal service or even directly endanger the strength by gradually promoting fatigue failure. In such cases the theory may indicate ways of reducing detrimental vibrations [7]. It is expected the security quality of the sewn fabric could be deteriorated as a result of the sewing needle vibrations [9]. The free vibrations mean the mechanical vibrations which are performed by a mechanical system (as sewing needle) having no energy supply from outside but they take place when the system is disturbed from its position of equilibrium and then suddenly released [7]. Gorman [3] has written that there are two commonly analyzed methods for having solution to the problem of free vibrations of bars (needles) and beams. The method, most frequently used was to solve the bar–beam-differential equations that express equilibrium between inertia forces and elastic restoring force, subject to prescribed boundary conditions. The second method is an energy method which consists essentially of utilizing the fact that in free vibration the sum of the beam-sewing needle-potential energy and the kinetic energy is constant. The Gorman method is highly applied in our work. Feodosev [2] has stated that the theory of vibrations is of special importance for applied problems: encountered in Engineering practice, among others in the designs of the machine – industrial sewing machines and structures.
There have been cases when an engineering structure designed for a large of safety to withstand static loading failed under the action of very small (relatively) small periodically acting force. In many cases stiff and very strong structures have proved unserviceable in the presence of varying forces whereas a similar lighter structure and not so strong at first glance – industrial sewing machines – sustain the same forces absolutely safely.
Varvak [8] has claimed that the special cases of the mechanical elastic system with single and multiple degrees of freedom could be tabulated for practical applications where the table has 3 columns: scheme of the mechanical system, degree of freedom and finally the natural frequency column. The table includes about 52 schemes of vibratory mechanical system.
Belyaev [1] has studied some important topics in the field of vibrations of the mechanical systems as the effect of the vibration resonance on the value of the stress in the machine elements – sewing needle – during the vibration process. In addition the calculation of the equivalent mass of the vibratory system has been carried out where for example sewing needle – as a cantilever beam the equivalent mass is FLv/3g [v – needle’s material specific gravity, L – length of the sewing needle and g – gravitational acceleration and F – cross-sectional area].
Panamarev [6] has studied extensively the vibrations of the coil spring as longitudinal (axial) or lateral (transverse) under different boundaries conditions. Also the axial vibration of turbine blades was evaluated by the way all the studies of Panamarev [6] were shifted to the Engineering practical applications and could be efficiently used in the industrial sewing machines as a point of our view [4].
The actual configuration of the sewing needle [9] is shown in Fig. 1. The first part of the Mathematical Approach will be devoted to the needles with constant cross sections and with classical and non-classical boundaries.
|
Figure 1. Industrial sewing machine needle. |
The calculation Scheme [line diagram] is shown in Fig. 2a.
|
Figure 2a. Sewing needles with classical boundary conditions and with constant cross sections. |
The mean value of the needle diameter is calculated by the use of the weighted inertia of cross sections Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle I_i\quad \mbox{where}\quad i=1\mbox{,}2\mbox{,}3\quad \mbox{and}\quad 4}
|
(1) |
|
|
Due to the Engineering experience and practice, the value of average needle diameter = 0.89 mm is reasonable.
The transfer of the actual configuration of the sewing needle from a bar with variable cross section to a bar with constant cross section by using the weighted average of the needle area inertia of cross section is an approximated method due to the small differences in the needle diameter along its length. The more accurate approximated technique is the method of the Russian Scientist Jemochken [5].
Due to Gorman [3]
|
(2) |
|
(3) |
where Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \rho }
– density of sewing needle material (steel) Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle =7850\quad \mbox{kg}/\mbox{m}^3}
, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle A}
– Sewing needle cross-sectional area, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \omega } – circular natural frequency, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle L} – sewing needle overall length, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle E} – Young’s modules for sewing needle material (steel) Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle =206\quad \mbox{MPa}}
, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle I}
– area moment of inertia of the needle cross section, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \beta } – Eigen value in sewing needle vibration problem via special table, linear natural frequency. The sewing needle modal shape as a function of Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \xi =\frac{X}{L}isr(\xi )}
, x − a variable distance along the needle axis for different bounding conditions is as follows:
|
(4) |
|
(5) |
The equation of the modal shape for clamped-simple needle [CS] is
|
(6) |
|
(7) |
The modal equation for free–free sewing needle (FF) is as follows:
|
(8) |
|
(9) |
The database of the sewing needle is as follows:
Length = Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle L=45\quad \mbox{mm}=0.045\quad \mbox{m}}
Diameter = Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \overline{\varphi }=0.89\quad \mbox{mm}=8.9\times {10}^{-4}\quad \mbox{m}}
Area inertia of cross section Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle I}
|
|
|
|
The Eigen value for different boundary conditions and for different modes [3] are shown in Table 1.
Mode | Free–free | Clamped-free | Clamped-simple |
---|---|---|---|
1 | 0 | 1.875 | 3.927 |
2 | 4.73 | 4.694 | 7.069 |
3 | 7.853 | 7.855 | 10.210 |
4 | 10.95 | 10.96 | 13.332 |
Source: Gorman [3].
The calculation of the natural frequencies for the previous stated needle in (SPM) is as follows:
|
|
Free–free Sewing needle [CF] boundary conditions,
|
The summary of result is shown in Table 2.
Mode | Free–free | Clamped-free | Clamped-simple |
---|---|---|---|
1 | 0 | 21,548 | 94,522 |
2 | 137,130 | 135,051 | 306,285 |
|
(10) |
where
Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle K^{{_\ast}}}
dimensional linear spring constant
|
(11) |
Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle K}
– spring constant for linear coil spring, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle L} – needle overall length, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle E} – Young’s modulus for the sewing needle material (Steel) and I – area moment of sewing needle cross section.
Also the modal shape equation is as follows:
|
(12) |
where
|
(13) |
|
(14) |
where Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle r(\xi )}
– Needle modal shape as a function of Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \xi =\frac{x}{L}(dimensionless)}
, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle x}
– distance measured along the needle, fn – frequency of sewing needle vibration in nth mode, fCF – natural frequency of clamped free needle, and Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle Q} – measure of how far sewing needle frequency lies between limiting frequencies as shown by special Table 3, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \beta } – Eigen value is appearing in needle’s vibrations in problems, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle F_{CS}} – natural frequency of clamped simple Sewing needle, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle CF} – clamped free and Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle CS} – clamped simple, CE – Clamped-Elastic (non-classical boundary conditions).
In our case, we can show the upper limit Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \left(Q=1.0\right)}
in an asymptotic fashion, for this reason the following relationship between Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle Q\quad \mbox{and}\quad K^{{_\ast}{_\ast}}} is limited for intermediate late values of Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle Q} greater than 0.8.
|
(15) |
where Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle K_{a=0.8}^{{_\ast}{_\ast}}}
is the value of Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle K^{{_\ast}{_\ast}}} at Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle Q=0.8} and any analyst of the tabulated data indicates that the previous Eq. (15) also gives frequency with error not greater than 1 percent [3].
The calculations of the sewing needle with constant cross section and with non-classical boundary conditions – see Fig. 2b are the following: from special Table 3 we can find as follows: Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle K_{\varphi =0.8}^{{_\ast}{_\ast}}=89.96}
assume fabric elastic resistance coefficient k = 2000 N/m, then
|
|
Figure 2b. Sewing needle with non-classical boundary conditions with constant cross section. |
Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle A_s}
shown previously in Section (I),
|
|
For our case – Fig. 2b with n = 1
|
=67.229 SPM. See Table 3.
n | Needle with variable cross sec. | ||
---|---|---|---|
Stepped | Conical and circular | ||
Nose cone | Truncated cone | ||
1 | 180,400 | 118,832 | 100,675 |
2 | – | – | – |
In this section, the variable cross sections sewing needles, as seen in Fig. 3 are divided into the following: (a) stepped needle (two sections), (b) nose conical needle and (c) truncated conical needle.
|
Figure 3. Sewing needles with variable cross section and with classical boundary conditions. |
The stepped sewing needle is shown in Fig. 4, where the equations of needle modes are as follows:
|
(16) |
|
(17) |
|
(18) |
|
Figure 4. Stepped sewing industrial machine needle. |
Then;
|
(19) |
|
(20) |
where
|
(21) |
The frequency (natural) is the same as in Eq. (2).
The database of the stepped sewing needle shown in Fig. 3a is as follows:
|
|
Then: Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle E_1I_1=206\times {10}^9\times 2.4850\times {10}^{-13}=} Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): 0.0512
|
Return back to special Table 3 we can write Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle {\beta }_1=3.966}
for n = 1 and
|
For Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle n=1}
|
A. Nose cone needle
The needle configuration is shown in Fig. 5 from specified Table 3 we can find the ratio Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle b_0/b_1=0} , and for n = 1 then Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle {\beta }^{{_\ast}}(Eigenvalue)=2.2}
|
|
|
Figure 5. Conical incomplete sewing industrial machine needle. |
B. Truncated cone needle
The needle line diagram is shown in Fig. 5.
|
From specified Table 3 we calculate the following: Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle \frac{b_0}{b_1}=\frac{1.33}{1.5}=0.89\mbox{,}\quad \therefore \quad {\beta }^{{_\ast}}}
Eigen value = 1.8, Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): {\textstyle f=\frac{{1.8}^2}{2\pi \times {0.04}^2}\times \sqrt{\frac{\rho A_1}{{EI}_1}}=}
Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://test.scipedia.com:8081/localhost/v1/":): 1678\quad n=100\mbox{,}678\quad \mbox{SPM}
and see the sewing needle as truncated circular cone is shown in Fig. 5.
From the previous calculations for the different sewing needle configurations and cross sections, the following conclusions findings could be written:
where x is a variable in the direction of the sewing needle length.
Published on 11/04/17
Licence: Other
Are you one of the authors of this document?